Taidacent High Precision 5 Digit Amp Meter DC 0.0000-3.0000A Ammeter Digital Display mA Digital Ammeter 0.36 Inch Red LED Display

I got this to measure current when a car is shut off. Wired it in series on the negative battery terminal. It did a great job. Much better than a multimeter. It does take a bit of wiring. I added alligator clips to the big wires and connections to a little power supply on the small wires. It measured an eighth of an amp @ 12V no trouble at all. The measurement was stable at tenths, changed slowly at hundredths, and jumped about on thousandths and ten thousandths.Considering I was measuring what is likely a short circuit someplace I don't find that surprising. Some tape to cover the back and I've got a nice piece of test equipment. A real bargain at the price.

Excellent big readout visible at a great distance.About performance is super accurate in measurements.Excellent Digital display Ammeter, nice performance. . . No issues, No complaiments.We installed carefully avoiding short-circuits and works OK.Very important is taking care when you are wiring this Ammeter because many manufacturers made other similar Digital Panel Voltammeters and they are very similar, but wiring and connecting it may seem the same or be identical, but it is not. . . Since the 1990s onwards I mounted many of those Digital and Analog panel Voltammeter and many times it always changes in some detail or wire positions.((( My My advice is this: ))) Always check your wiring connections 3 times and always choose a low amp load and low voltage to start testing your Digital Panel Voltammeters. . . Then if everything goes OK, with a small marker write the poles in the resistor shunt and put masking tape on the wires and label them as you see fit (if Ammeter requires shunt-resistor) ---.Fast shipping too arriving safely and without harm. We are happy to have another. This is our third Ammeter like that".We surely continuing buying more of those Ammeters for its great performance... They are a little expensive, but a thousand times better than those junk filth that sell a lot for a couple of dollars. . .《《《 We recommended 100% 》》》A++

Not as accurate as claimed and no apparent way to recalibrate these meters. If there was a way to precision calibrate these meters, they would definitely be 5 stars. If you only need to see a change in current and not absolute accuracy then these meters might be ok.

Using this in conjunction with my power supply that only has a 3 digit meter. Now I can measure the actual current draw of a single segment of an LED display.The 3 Amp limit is no problem, as this supply is only rated for the same 3 Amps.

I finally have a milliamp meter I trust!works great

Worked perfect for our application. Affordable and reliable.

i have compared this meter with two recently calibrated Fluke voltmeters and it all lines up to at least 2 decimal places.

I wasn't expecting this meter to be this accurate. I repair lot of phone and ipads for data recovery and this little device have worked magic for me to detect issues.