Hudson Exchange 15 Gallon Tight Head Drum with 2" & 3/4" Fittings, UN Rated, HDPE, Natural

Worked well for my project.

If you live in the area where natural disasters are prone, this is something to have to store water, used it a lot.(The ratio of bleach to water that I use for sterilization is 1 tsp per 10 gallons.)drinking) )

I'm turning our cabin into a tiny home - RV style. You can see the tank on the left side of the photo. Fits nice an neat next to a standard kitchen cabinet. I've ordered my sink, faucet, stove and this 30 gallon water container. Got the container last Thursday. I'm impressed with the thickness of the walls - there is almost no way to puncture this container - and I know because I did! That's because I needed to get my water pump in it so I had to cut a flap at the top to put the pump in and be able to slide the power and hose through it. I wound up having to use a propane torch to just bend the flap!I was going to get a regular square RV water tank but the price was far more expensive than this product. The bungs were hard to open without the proper tools but a screwdriver and hammer are all that is needed to move the plugs.

The UN rating (1H1/Y1.9/160/20) for this container satisfies the requirement for liquid pool chlorine (Y1.9 or higher). The container has two bung plugs 2 inch and 3/4 inch. The larger one for filling and the smaller one I used to thread the suction line for a Stenner Econ T peristaltic pump. I pulled the line through the larger fill hole to install the line weight at the end and drop it into the tank. The 2-inch opening is perfect for pouring 1-gallon jugs into the tank.NOTE: If you are using a plastic container for liquid chlorine storage, be sure the UN rating is Y1.9 or higher.

Tank was delivered on time, clean and otherwise as described. I have no prior experience with any similar product so am at a bit of disadvantage in offering this suggestion: The 2" bung seems to be rather a weak point. The threads easily cross-thread. Improvement by 1) flattening the bung entry angle and 2) adding a collar on the molding to provide a solid 1/2" of threads or so. 3) Make the tank round; there may be a reason in industrial use that the tanks are not round, i.e., about 14" x 14.75" instead of 14" (or whatever) in cylindrical design. Thanks

Good jug for what we needed it for - sap collection.

Good quality and fast shipping

I purchased this with a dolly for a gasoline caddy. Having said that, be warned, this is not rated for gasoline, but it is made out of the same material as gas cans.