⚡ Cut Sharp, Work Smart — Own the Bench, Own the Craft!
The Einhell TC-TS 2025/2 U bench-type circular saw is a 2000W corded powerhouse featuring a 250mm carbide-tipped blade with easy single-hand height and angle adjustments (±60°). Its robust metal base with side extensions offers a spacious 583 x 893mm work surface at an ergonomic 850mm height. Designed for precision and durability, it includes parallel and angle stops for clean cuts and comes with a 3-year warranty, making it the ultimate tool for serious DIY professionals.
Manufacturer | Einhell |
Part Number | 4006825646474 |
Product Dimensions | 113.5 x 89.6 x 87 cm; 19.2 kg |
Item model number | 2025/2 |
Colour | Multi-color |
Style | TC-TS 2025/2 U |
Power Source | Corded Electric |
Voltage | 2.3E+2 Volts |
Wattage | 2000 watts |
Item Package Quantity | 1 |
Number of Pieces | 3 |
Handle material | Plastic or rubber |
Blade length | 250 Millimetres |
Certification | CE |
Special Features | Corded |
Included Components | Bench-type circular saw, carbide-tipped precision saw blade |
Batteries included? | No |
Batteries Required? | No |
Battery description | Not Included |
Item Weight | 19.2 kg |
J**N
Great item couple of suggestions.
Now this was a very pleasant surprise as to size ! Even without the extra add-ons to width this still like a dinner table for two.Easy to follow set up just do not over tighten bolts as dud on one of the legs.Decided before if table wide enough before going into fitting the extra width .Do check saw is set right as in instructions I did a couple test cuts before the table guide was accurate.You do and will need a proper hoover to suck up sawdust, do not think a normal household one will do trust me it won’t ! Get a 20lt min wet dry one .Over all very happy with it .Oh one thing I’m adding on is two wheels to make it easy to move about so decide where you use it if it going to need moved about as the extra support legs are flimsy if you move it as buckle under wieght .But value fir money ? Yes very much so, I have the smaller size one two and it a quarter size of this one. 🌟🌟🌟🌟🌟🌟🏴🌟🌟🌟🌟🌟
M**N
Good for beginners and hobbiests
First things first. It cuts.It arrived as expected with Amazon. A good buying and delivery experience.Upon opening it was apparent the table was bent. I had two options, return and await a new one to be delivered, or be impatient and manually bend the thin metal back into place and utilise a spirit level to tell me when to stop.I was impatient. No drama, I done what was needed. As I was planning to build a cross sled and use the saw mainly for small cross cuts this wasn't an issue.So accuracy, it needed adjusting. Do not trust the angles on the saw tilt. You set it to 0 and it'll actually be about 10 degrees. I purchased a digital angle finder and trust in that.The tape measure and measurement finder on the table. Not accurate, about 3-5mm out. If ripping material with the fence I'd recommend using a metal rule and your eye for this and not relying on the manufacturers guides. Again, this isn't an issue for me as I built my own sled using the 5 cut method and now have accuracy to withing a thousand of an inch.Ease of use. It spins really fast and cuts wood, and also fingers. It's a simple plug in (3 pin), hit the green button and cut. Comes with a push stick (buy another for two directions of pressure).Value for money. I certainly wouldn't buy cheaper, but for what I needed it for, small projects utilising a push sled, it's perfect and didn't cost the Earth. Yes there are better out there, yes I one day aspire for bigger, but this is really all you need for small garages and projects.Oh, it's very messy. I hook it up to my Kercher W2 hoover. Next to useless. The hoover sucks fine, but the dust seems to chuck down to the floor and not the hoover extraction pipes fitted at the rear. Could this be rectified with a high volume low pressure vac? Probably. Do I want to spend hundreds doing do just yet? Nope. Just a forewarning to fellow hobbiests that your wives/husbands may well moan about covering your darling sons bike in sawdust.Would I recommend this saw? Yes.
L**O
Affordable, versatile, easy to use ... and safe
This was one of the best buys I made this year. It was not the easiest machine to assemble, but once in place, it is sturdy, safe and versatile. The two guides allow for straight and angular cuts. The guard makes it a safe piece of machinery, even cutting at maximum output. One of the few drawbacks is that it is loud; you'll need ear protection.I had tried a circular saw and felt that it was unsafe and inaccurate. By comparison, this table saw is precise and very secure. Don't take any shortcuts with the procedure to assemble it, it is absolutely vital to follow the different steps. Once you have got it going, you will find lots of (safe and useful) uses for it.
A**R
Nice Diy machine
For the money it's good value. It's very good at the DIY level, and to achieve the best from this machine, some thought and refinement is needed.If you want professional super accurate first time every time finish, this is not that machine.But again, it is a good machine for the money.
Trustpilot
1 month ago
2 weeks ago