ERYONE TPU Filament 1.75mm, 3D Drucker Filament TPU 0.5kg 1 Spool, -0.05mm, 95A, Transparent red

The media could not be loaded. Review of the 500g TPU 3D Printing FilamentHaving recently acquired and experimented with the 500g TPU 3D Printing Filament, I'm ready to share my insights and experiences with this product. The technicalities of 3D printing filaments can be overwhelming, but when it comes to TPU, the balance between rubber and plastic creates a unique printing experience. Here's a breakdown:Material & Quality:The TPU filament, as mentioned, finds its place between rubber and plastic. With superior tension, tensile strength, toughness, and resistance to aging, it is undeniably of high quality. Furthermore, it stands out due to its environmental consciousness, being crafted from mature environmental protection material. These qualities stand testament to its claims of longevity and durability.Print Specifications:With a diameter of 1.75mm, a tolerance of ±0.05mm, and a recommended printing temperature range of 190 - 220℃, it presents itself as a versatile filament. Moreover, the Shore hardness of 95A is an added advantage, suggesting a good balance between flexibility and rigidity. The recommendation for a 0.5mm hardened steel nozzle is precise and essential to consider for optimal results.Compatibility & Use:This TPU filament promises compatibility with a broad spectrum of FDM 3D printers, including popular ones like Ender 3, Monoprice, Prusa, MK3, and Creality. This, coupled with full mechanical winding and rigorous manual examination, means the filament is well-prepped for feeding into the printer, reducing the chance of errors.Performance Improvements:It's evident that strides have been made to enhance the filament's performance, resulting in easier, faster prints. The clog-free, bubble-free, low-warp, and low-string attributes are a boon for 3D printing enthusiasts. The filament's winding ensures smooth feeding, while the printed output benefits from a fascinating bending effect and increased grip upon water contact.Personal Experience:While the filament boasts many impressive features, it comes with its set of challenges. Firstly, its price point is relatively high, making it an investment that might deter some potential users. Moreover, working with TPU requires tweaking and configuring your printer settings, which might be cumbersome for novices. In essence, it's high quality but finicky, necessitating a little patience and finesse.Support & Warranty:It's comforting to know that support is readily available, with offers for replacements or refunds. This showcases the brand's confidence in their product and their dedication to customer satisfaction.Conclusion:To sum it up, the 500g TPU 3D Printing Filament is a top-notch product with a lot of potentials. While it demands a higher price and some adjustments to printer settings, the results, given the right conditions, can be splendid. For those looking for a filament that strikes the right chord between flexibility and strength, this might just be it.

I found it a bit scary as a newbie, wondering whether to risk using TPU on my lovely new first 3D printer! I did a fair bit of research before buying this TPU, I wanted good translucency, a decent brand, and a reasonable price. Eryone's Transparent TPU fitted those requirements so I gave it a go with a 500g spool. I'd also discovered that TPU is particularly prone to moisture absorption, making it spit and hiss and messing up the prints so before I opened the pack I found Rickey Impey's YouTube tutorial on making his "ultimate drybox" and bought the appropriate Sistema box, printed all the parts, built it, installed the spool, and I was ready to go. I print with my stock 0.4mm brass nozzle, at 10mm/s first layer and then 20mm/s after that. I've pushed it to 12.5 first layer and 15 after that without any issues. Haven't dared go any faster yet, hahaha, stuff takes ages to print but it comes out crisply printed and perfect in every way on everything I've tried so far. Supports pull away cleanly, I've made vase-mode (which is single wall thickness of course) boots/gaiters for keeping dust and dirt out of a classic car brake assembly, chunky grommets for sealing cable entries on outdoor connection boxes for wildlife cameras, replacement rubbery mount parts for an old but very functional camera tripod, resilient rubber jaw-covers for a vintage suction-mount vice, and a protective bumper case (found on Printables.com) for my new Pixel7a phone. Fantastic! My only regret is buying just 500g, the next spool will be the full kilo :o)I was also terrified of ruining my textured PEI bed that comes with the Elegoo Neptune3 Pro - TPU can bond permanently to it and rip the coating off the print sheet on removal, so I started off extremely carefully with tiny test items at different temperatures, and found that it sticks well but not TOO well to a completely cold textured PEI sheet, any problems with detachment and curling can be dealt with by heating to just 35C and/or using a brim for adapparently when the bonding happens and you have to shell out on a replacement print sheet, yikes!hesion. If you want to print on the smooth side you'll need a fair bit of gluestick and 35C+ to get satisfactory adhesion. Just not too hot or it'll BOND :o)

Good for the money, but not as well dried compared to more expensive filaments. After 24hrs in a dryer it printed nicely, but I still had stringing and little bumps on the print.However it adhered well to the build plate and the white is /very/ white. I had no issues with layer adhesion etc. I found that the support material I printed using the tree supports on bambu studio pulled away easier than expected.Decent for the price though! I

This was a new TPU Flexible Filament to me, I used many others but this was the 1st time using this one?The TPU prints well but I had to set the Hot End and Bed Temps to a st level to get it to print.I used my Qidi X-Plus-3 printer on a speed of 200 mm/s yes that is fast for TPU, But it works!The hod end was set to 240 C & the bed was 60 C & flow rate was 80% as 100% is far too much.I used a new carbon fiber bed sheet which held the TPU on really well, it came off after it cooled.Good filament I recommend it as it is semi firm & semi flexing.

Easy print TPU, even with ptfe tube attached, sad that does not have purple and sky blue

Bought this filament to use on my new 3D printer as it was a good price and only 500g so if it was not great I was not buying a whole reel. I certainly can say this filament is great but I have not tried other brands so far. Some reviews of TPU mention issues with printing but straight out of the box I have had excellent results. Hardly any stringing and excellent adhesion to the build plate by using the reverse smooth side with cheap masking tape and bed glue stick as some reviews mentioned TPU sticking to the build plate and not cleaning up well. All in all very happy with this TPU filament.