Question 1

Will this wire in and correctly work for a 2003 Buell Blast 500cc?

Accepted Answer

It will work for any bike. But it's essentially custom wiring. It's not plug and play. If you are comfortable with a wiring diagram then this will be no problem. And the instructions are in Mandarin. There are some great reviews on here that explain the pin-outs. You will also have to mount the magnet on the wheel and dial in the correct circumference (in mm) to get the speedo to read right. I used JB weld to mount the magnet. I put this on a 1985 Honda cb450sc. Good news is that it works well and looks good.

Question 2

How do i switch it from kph to mph?

Accepted Answer

With the unit on push and hold the button on the back for a few seconds it will change from mph to kph

Question 3

Do I need to use the magnet and sensor or can I retro fit my existing speedo cable? Also current bike is 5 speed, so cap 6th gear wire?

Accepted Answer

You have to use the sensor.  No socket for the speedo cable. If you wanted to use the cable you would have to convert the signal to digital from the speedo cable.  The sensor works well. I used one sensor and JB weld to stick it to my rim, I didn't have a space for it to fit anywhere else.  My bike is a 5spd but has no gear selection indicator (1985 Honda) so just used 5th for the topgear/OD indicator and taped off anything I didn't need.  Good gauge,  a little hard to see in full sun,  but no complaints otherwise.

Question 4

where are the instructions?

Accepted Answer

The wiring will have to be adapted to your motorcycle.  The pinout for the gauge is in the description of the item.  Here is a copy of wiring info.

Wiring Method:

Barrel connectors:

Black: Electric Switch Positive Pole

Red: Battery Positive (normally 12V positive)

Gray: 6 Gear 12 Negative Control, LCD Display

Three Pin Sensor Connector:

Red/White: Sensor Positive

Green: Sensor Negative

Black/White: Sensor Signal

Six Pin Connector:

Pink: First Gear,12V Negative Control, LCD Display

Green/Red: Second Gear,12V Negative Control, LCD Display

Green/Black: Third Gear,12V Negative Control, LCD Display

Yellow/Red: Fourth Gear,12V Negative Control, LCD Display

Yellow/White: Fifth Gear,12V Negative Control, LCD Display

Green/Red: N Gear 12V Negative Control, LCD Display

Nine Pin Connector:

Orange: Left Turn, 12V Positive Control, LCD Display

Red/Black：Rotate Speed

Light Blue: : Turn Right, 12V Positive Control, LCD Display

Green: 12V Negative

Red/Brown: Engine Trouble Signal

Green/White: Water Temperature Signal

Yellow/Brown: ABS

Blue: Distance Light

Blue/White: Oil Signal

Manufacturer	E-Bro
Brand	E-Bro
Item Weight	1.24 pounds
Package Dimensions	8.54 x 8.31 x 3.39 inches
Is Discontinued By Manufacturer	No
Manufacturer Part Number	ECS-782

E-Bro 12V Multi Function Motorcycle LCD Digital Odometer Speedometer Tachometer Gauge Solid

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions